Full Torque Driveshafts custom Long Travel Toyota Driveshaft. This shaft is built with 1350 series NEAPCO solid-cross u-joints and a long-travel slip and spline. The long-travel slip/spline combo gives you 6" of usable driveshaft travel. Made with your choice of 2.5"x.083", 2.5"x.120", or 2.5"x.250"DOM tubing. 
 
Please provide us a minimum of 2 of the following flange to flange measurements: Full Compression (bump), Ride Height, and Droop. On leaf spring suspensions, it is easiest to get ride height and full droop. Refer to measurement diagram in the product photos. 
 
This shaft uses our Full Torque exclusive 1350 Series High-Angle flanges on both sides! 30 degree joint angle.  
Our flanges are dual drilled for the following patters:
60mm x 60mm SQUARE pattern 
66mm x 66mm SQUARE pattern 
 
*OPTIONAL UPGRADE TO 2.5"x.250" DOM Tubing* +$195
.250" wall driveshafts are for OFF-ROAD USE ONLY. Using a .250" heavy-wall shaft on-road may cause serious vibration problems, catastrophic failure, and/or damage to other components of your vehicle.